We are interested in granules of recycled polymers PP and PA. The projected monthly demand is 100 tonnes. The main indicators within : Polypropylene PP • MFI flow rate 230°C/2.16 kg: 9-25 /10 min • Density: 0.9-0.91 g/cm3 • Bending modulus: 800-1600 MPa • Impact strength: 5.7 kJ/m2 • Tensile strength: 30-40 MPa/ Polyamide РА6 (without glass filler) black (let's take a closer look at the characteristics) • Tensile strength: 70-110 MPa.
We are interested in granules of recycled polymers PP and PA. The projected monthly demand is 100 tonnes. The main indicators within : Polypropylene PP • MFI flow rate 230°C/2.16 kg: 9-25 /10 min • Density: 0.9-0.91 g/cm3 • Bending modulus: 800-1600 MPa • Impact strength: 5.7 kJ/m2 • Tensile strength: 30-40 MPa/ Polyamide РА6 (without glass filler) black (let's take a closer look at the characteristics) • Tensile strength: 70-110 MPa. • Tensile strength in the conditioned state (saturated with moisture) is not less than 65 MPa.
we are looking in the Turkish market for thermoformed grade polypropylene homopolymer and styrene monomer, we will be attaching the technical sheet of the homotype that we currently use.
our company is looking for a reliable supplier of polyethylene and polypropylene. Our current demand for polyethylene is approximately one truck - 22 tons per month. In the next months, we plan to expand our factory, so our demand will also increase to approximately 30 tons per month. The current demand for polypropylene is approximately 10 tons per month.
Hello, I want to get raw material, polypropylene HDPE, polytilene, etc.
i am interested of masterbatch black -30-40% concentration and also CaCO3-80% concentration I am interested of the below items: -PE100 -virgin, melt flow rate of 0.25-0.3 at 190°C /5kgs, density at 0.95 -PE100RC virgin, melt flow rate of 0.2-0.25 at 190°C /5kgs, density at 0.95 -PP , melt flow rate of 2.0 at 230°C/ 5kgs -regranulated HDPE with melt flow rate of 0.6-0.9 at 190°C/5kgs black color, density 0.95 -regranulated HDPE with melt flow rate of 0.6-0.9 at 190°C/5kgs blue color, density 0.95 LDPE and LLDPE I am interested in.
Please recommend Turkish plastic manufacturers Poliamid, Polyethylene, Teflon etc - rods and shee
We are a company located in Mauritania we manufactured foam so we are looking for quimicals like Polyol, TDI, silicone
I am looking for a plastic raw material in Isfahan-Iran
We are interested in cooperation in the supply of Baerolub L-PM, Baerolub FTO, Baerolub PA-200, Baeropan 50302 PLK MC. I ask you to contact the specified e-mail address to discuss cooperation issues. Thank you in advance.
