Needle for regional anesthesia, spinal with pencil point type Pensil Point 27G 90MM Your company is engaged in the supply of such needles
Complete repair kit for dn65 kv-l6 k ball valve (including 2 pcs of seat-item4, 1 pc body gasket-item19, 1 set v-packing-item9, 1 pc thrust washer-item8, 1 pc o-ring-item24 & 1 pc bushing-item10) Qty : 1 set 24 hex nuts iso8673-m42 x3-10 1 01 g1.6 Power unit Ct 10 380..480 vac / 24 vdc; 10 a Ct10.241
Hello, we are interested in sluice gates
Manual high-intensity fire extinguishing system for extinguishing wildfires, assembled. Specifications: - performance shall be no less than 2.25 l/min.; - the length of the compact stream shall be no less than 8.5 m.; - the length of the sprayed stream shall be no less than 3.5 m.; - the dry weight shall be no more than 2.35 kg.; - the equipped weight shall be no more than 20.35 kg.; - the dimensions shall be no more than, mm – 520х420х220 The manual fire extinguishing system consists of: 1. An elastic waterproof container shall be in a cover, at least one pc.: - the volume of the container shall be no less than 18 liters; - the container shall be made of rubberized material; - the cover for the container shall be made of durable blended fabric; 2. Hydro spray gun, not less than - 1 pc.; 3. Glass lid (not less than 300 ml.) with a mesh filter, not less than - 1 pc.; 4. Shoulder straps must be made of a durable blended fabric not less than 50 mm wide and must be supplemented with a waist and chest strings to evenly distribute the load on the back and prevent the container from slipping to the side in a quantity of not less than - 1 pc.; 5. Heat-insulating lining must be made of polypropylene and with dimensions of not less than 330 mm by 360 mm in a quantity of not less than - 1 pc.; 6. Solid wetting agent (quick-dissolving tablet) must be at least - 3 pcs. 7. Autonomous high-pressure installation for supplying fire-extinguishing
You will offer my request Turkish companies right? Fittings, taps Manufacturers from Turkey
I need help Perforated cable tray GKT-B30D is a channel made of metal, which includes straight elements with perforated base. It is used for installation and laying of insulated electrical cables indoors and outdoors. It is made from rolled steel sheets 2 mm thick. The methods used for corrosion protection are galvanizing methods. Hot-dip galvanizing (TS 914 standard EN ISO 1461, coating thickness 55-120 µm.) Technical characteristics: Tray height 60 mm; Tray width 300 mm; Tray length 3 m; Steel sheet thickness 2.0 mm; Load capacity up to 250 kg/m Corrosion protection: hot galvanized
I need spare parts for Hino 300 I'm looking for spare parts for commercial vehicles Hino 300 O**** *****, +7701*******, ****_o*****@mail.ru, spare parts for Hino 300, I have a spare parts store and I need suppliers of spare parts made in Türkiye
You have weight control system for weighing the vehicle in motion. You can send a commercial offer. Thanks for the quick response. With great respect, Director of E******* LLP S***** Ku***** A*****
Opening a distributor in Kazakhstan and the CIS drip irrigation
We need honey well products
