Yapi kimyasallari (kalekim) uretim makinesi Ozellik olarak cift dolum agizli toz urun paketlemesi yapmakta ve 2 Tonluk mikser kapasitelidir
The dates and codes are printed on the cans by ink jet unit after the filling and crimping processes PE (Poly ethylene) molds are changeable thus and so customers can print almost all of cans.
The cans are carried to centrifuge plate by an elevator. Vertically positioned on the centrifuge plate cans g oto the turning table by collator and after the caps passed conveyor, it is put on the cans.
The Valve Throwing Unit carries valves towards the turning table through the aspiration pipe and throws inside the empty cans. The unit is provided by a valve control head which stops the turning table when there is no valve on the can.
This machine is a pneumatic pump that supplier constant gas pressure inside the gas head.
This filter is consisted of 5 columns and had been connected by pressure resistant tube. The system was installated on a platform four wheel. Each columb has been removed its top plane by eight nut. Embed in columbs moleculer filter raw materials have been changed easyly like this.
Standart short line had been occuring only liquid filling, crimping and gas filling heads. Convoyeur subsist on this line. Valve throwing, actuator stamping and capping is made manually. Inkjet is opsional and if required this unit can supplement the standart line.
Some operations have been made manual with standart line. For Example : Valve Throwing, Actuator Stamping, Capping and Inkjet is made manually. Firstly, empty cans have been carried to liquid filling by the convoyeur. Valves is put by hands and then cans pass from valve crimping and then goes to gas filling. After the gas filling, cans are crimping manually thereafter cans are closed by hands and after the opsional inkjet unit, products is ready to packing.
