Our company ******* ****** supplies finishing materials for the construction of buildings in the Republic of Belarus. For the facades of a residential complex under construction, we are looking for the following items to supply: Steel COR-TEN A SSAB: 1. In sheet 1500*1250*4.0 mm - 5 tons. 2. In sheet 1500*1250*2.0 mm - 5 tons. 3. In rolls 1250*1.0 mm - 5 tons. 4. In rolls 1250*0.5 mm - 5 tons. Can you give me an offer for such delivery?
WE ARE A COMPANY IN ISRAEL WE ARE INTERESTED IN PURCHASING CONSTRUCTION IRON.HOW CAN WE CONTACT YOU THANK. YOU BUILDING IRON FROM 6 TO 12 LENGTH 12
if you have this in your stock or you if you can make this custom GI sheet, please let us know 1. GI Sheet : a. Physical properties: 1. Thickness: (0.38~0.45) mm 2. Weight of roll: ≤ 5000 kg 3. Width of roll: 900-915 mm (GI Sheet must be supplied as roll) 4. Thickness of Zinc coating ≥ 0.015 mm (each side of GI Sheet) 5. Weight of Zinc coating ≥ 0.0225 gm per sq cm 6. Weight:Sheet unit weight according to size and coating 7. The surface of the sheet/roll is smooth, clean and free from all spotsand should have crystallized mild steel- checkered special galvanized layer b. Chemical composition & Mechanical properties: 1. Carbon: 0.15 % Maximum 2. UTS :27~52 kg/mm2 3. Elongation: ≥ 18% 4. Bending Test with standard: ≥ 6 times bending at 90 degree angle. 5. Peeling Test: No peeling at repeated 180 degree bending c. Packing: 1. The G I Sheet should be packed in roll will be wrapped with moisture/water proof paper on the top of the roll to protect moisture/water. After wrapping the roll should be covered with an extra G I Sheet and reinforced in three places with wrap (Two in two end & in middle). The inner & outer edges of the roll should be covered with angular sheet so that the edges of the rolled sheet should not affect for reinforcement. Than the roll to be fastened in lengthwise in four or more places as a required to avoid the looseness of roll. 2. The first sheet of each roll to be labeled with the following marking: (a) Name of manufacturer (b) brand Name (c) group No. (d) dimension and weight of each bundle (e) signature of the technical control department. 3. Galvanized roll can not be transported in any dirty carriages which carries NaCl, Ca(OH)2 and NH4CI. 4. Galvanized roll for delivery should be painted with neutralized mineral oil. 5. A certification is to be provided along with the delivery of each lot showing -name of manufacturer, weight, group No., dimension, results of tests and code No. of this standard. 6. Warrantee for 01 year after acceptance of the stores. d. 1. Country of origin: Group A Country 2. Country of manufacture: Country of Origin 3. Port of Shipment: Country of Origin. Kg 200000 2. GI Wire : Size: Dia 4.00±0.12 mm Technical Requirement: 1. Tensile Strength = 30-50 kg/mm2 2. Elongation= More than 10% 3. Carbon = 0.15-0.25% 4. Wt of Zinc Coating = More than 95 gm/M2 5. There should not have any ungalvanized spot on the surface of the wire. 6. The wire should pass the torsion test Kg 2000
I need a factory of iron sheet in turky
I am looking for iron sheets that are used for manufacturing iron doors for houses and villas
we need CIF galvanized iron sheet price
her turlu demir ithal eden bir tuccarim
I need a price for iron 6,8,10,12
Iron pipes Building iron Industrial iron for bridges, tubes, angles and sheets Our current order
