Lista de fabricantes de inversores y UPS de Canadá publicada en la base de datos de importación y exportación (importador-exportador) de TurkishExporter. . ¿Cómo puedo encontrar empresas fabricantes de inversores y UPS de Canadá? . ¿A qué empresas de Canadá puedo exportar productos de inversores y UPS? Empresas mayoristas de productos de inversores y UPS de las que pueden beneficiarse los fabricantes o proveedores que desean exportar a Canadá. Empresas fabricantes de inversores y UPS de esta lista. ¿Puede descargar las empresas fabricantes de inversores y UPS de Canadá de esta lista desde la lista de descargas aquí? AVISO: La base de datos incluye el nombre de la empresa, el número de teléfono, las direcciones de correo electrónico y el sitio web.
I have two ups project. Please contac me t by email to sales@m*****.com for more details.
are you selling electronic components Electromechanical Power Supplies DC/DC Power Supplies VOF-85-12
1.- LUMINAIRE UNIT WITH LED TECHNOLOGY 150-170W ( quantity:10,000) LUMINARY • BRAND: INDICATE • MODEL OF THE LED TECHNOLOGY LUMINAIRE: INDICATE • ORIGIN: INDICATE • NOMINAL POWER OF THE LED LUMINAIRE: IT MUST BE IN THE RANGE OF 150 - 170W • POWER FACTOR OF THE ASSEMBLY OF THE LED LUMINAIRE: ≥ 0.95 • WEIGHT OF THE LED LUMINAIRE: ≤ 12 KG (may vary) • THE OPTICAL AND ELECTRICAL BLOCK: THEY SHOULD BE IN SEPARATE COMPARTMENTS, SHARING THE SAME CASE. • THE FIXING SYSTEM OF THE LED LUMINAIRE MUST HAVE ELEMENTS WITH HIGH OXIDATION RESISTANCE, SUITABLE FOR OUTDOOR INSTALLATION. • FIXING ON METAL TUBES WITH AN EXTERNAL DIAMETER OF: LESS THAN OR EQUAL TO 48.33 MM UP TO GREATER THAN OR EQUAL TO 60.3 MM. AND WHERE APPROPRIATE, WASHERS, GALVANIZED OR ZINC PLATED. • TILT ANGLE THAT IS ADJUSTABLE ON SITE FOR BOTH POST-TOP (0 TO +15°) AND SIDE ENTRY (0 TO -15°) ASSEMBLY IN 5° STEPS. • IMPACT RESISTANCE INDEX: ≥ IK 08; IN ACCORDANCE WITH THE UNE-EN 62262 STANDARD OR ITS EQUIVALENTS • TIGHTNESS OF THE OPTICAL BLOCK: ≥ IP 66; IN ACCORDANCE WITH THE IEC 60598 STANDARD OR ITS EQUIVALENT ACCORDING TO THE ORIGIN OF THE LUMINAIRE. • THE MODEL OF THE LUMINAIRE SHOULD HAVE SEALING ON THE BODY IN LOW OR HIGH RELIEF MADE IN THE FACTORY, STICKERS OR OVERLAPPED PLATES WILL NOT BE ACCEPTED.
