Me gustaría que respondiera a nuestra solicitud de los productos de cable que se enumeran a continuación. Indique también las dimensiones generales, el peso y el tiempo de producción de la carga. Estoy esperando su respuesta. RE-2X(St) Y PIMF 2x2x0,75мм2 - 18309m RE-2X(St) Y PIMF 5x2x0,5мм2 - 14127m RE-2X(St) Y PIMF 10x2x0,75мм2 - 9231m
Necesitamos un cable de cobre flexible con una tensión de hasta 1 kV, de 5 hilos, con una sección transversal de 25 mm2, que funcione en un rango de temperatura de -25 a +90 grados Celsius. La cantidad es de 500 metros. Y un cable de cobre flexible con una tensión de hasta 1 kV, de 5 hilos, con una sección transversal de 16 mm2, que funcione en un rango de temperatura de -25 a +90 grados Celsius. La cantidad es de 1000 metros. ¿Qué opciones pueden ofrecer?
Please send us your best quotation on our below RFQ : 1. CBL,ELEC ARM FIRE,B.5.2,0.6/1kV,5Cx120mm Fire spec armoured electrical cable Voltage 0.6 / 1 kV Construction AS PER IEC 60092-350 Mat spec, insulation ERP Mat spec, inner sheath EV Armouring GSWB / TCWB (FOR MULTI-CORE) OR TPBWB (FOR SINGLE CORE) Mat spec, outer sheath EVA Colour, outer sheath BLACK Number, cores 5C Cross section, cores 120mm2 Cable type B.5.2 Maximum system voltage UP TO 1000 V.A.C / UP TO 250 V.D.C Service GENERAL PURPOSE POWER ITRIBUTION AND CONTROL Conductors ANNEALED COPPER CONDUCTOR ACCORDING TO IEC 60228 Core identification As per table-2 of STN-00-Z30-E-YP-0001 Fire performance CABLES SHALL MEET THE REQUIRE MENTS OF IEC 60332-1-1 and IEC 6032-1-2, IEC 60332-3-24 (Category C) and IEC 60092-352, IEC 60332-3-22 Quantity - 500 e.a. 2. CBL,ELEC ARM FIRE,A.5.2,0.6/1kV,5Cx120mm Fire spec armoured electrical cable Voltage 0.6 / 1 kV Construction AS PER IEC 60502-1 Mat spec, insulation XLPE Mat spec, inner sheath PVC Armouring AWA (FOR SINGLE CORE) OR SWA (FOR MULTICORE) Mat spec, outer sheath PVC Colour, outer sheath BLACK Number, cores 5C Cross section, cores 120mm2 Cable type A.5. Maximum system voltage UP TO 1000 V.A.C / UP TO 250 V.D.C Service GENERAL PURPOSE POWER DISTRIBUTION AND CONTROL Conductors ANNEALED COPPER CONDUCTOR ACCORDING TO IEC 60228 Core identification As per table-2 of STN-00-Z30-E-YP-0001 Fire performance CABLES SHALL MEET THE REQUIREMENTS OF IEC 60332-1-1 AND IEC 60332-1-2,IEC 60332-3-24 (CATEGORY C). Quantity - 500 e.a. 3.CBL,ELEC ARM FIRE,0.6/1,EPR,2C+E,120mm² Fire spec armoured electrical cable Application CONTROL, EARTH AND LOW VOLTAGE POWER CABLES Flammability properties FIRE RESISTANT Voltage 0.6 / 1 kV Construction XLPE / PVC / SWA / PVC Mat, conductor wire PLAIN ANNEALED STRANDED COPPER Mat spec, insulation XLPE Mat spec, inner sheath PVC Armouring SINGLE LAYER OF GALVANIZED STEEL WIRE BRAID Mat spec, outer sheath PVC Colour, outer sheath BLACK Identification, cores RED, BLUE, GREEN / YELLOW Number, cores 2C + E Cross section, cores 120 mmІ Number of grade MULTI CORE Installation A - ON-SHORE PLAN Form of supply DRUM Type A.5.5 Original manufacturer PRYSMIAN Reference 20F60437 PRYSMIAN Quantity - 700 metrs 4.CBL,ELEC ARM FIRE,0.6/1kV,EPR,3C,120mm² Fire spec armoured electrical cable Voltage 0.6 / 1 kV Construction EPR / EVA / GSWB / EVA Mat, conductor wire COPPER TINNED ANNEALED STRANDE Mat spec, insulation EPR + MICA / GLASS TAPE Mat spec, inner sheath EVA Armouring GALVANIZED STEEL WIRE RAID Mat spec, outer sheath ETHYLENE VINYL ACETATE EXTRUDED ELASTOMERIC Colour, outer sheath BLACK Identification, cores 1G YELLOW / GREEN / RED + BLUE Flame, propagation IEC 60332-1 IEC 60332-3-22 Number, cores 3 CORES Cross section, cores 120 mmІ 70 mmІ Diameter, od, overall 46.5 mm (NOMINAL) 52.1 mm (NOMINAL) Type B.5.4 Operating temperature -40 °C MINIMUM Dia, armour wire 0.4 Cable conductor dc at 20 °C 0.154 / 0.270 ohm/km Current rating 237 A Bending radius 6X Standard, conductor IEC 60228 Class 2 Manufacturer PRYSMIAN PRYSMIAN Quantity - 1000 metrs
Instrument cable produced?
I need help Perforated cable tray GKT-B30D is a channel made of metal, which includes straight elements with perforated base. It is used for installation and laying of insulated electrical cables indoors and outdoors. It is made from rolled steel sheets 2 mm thick. The methods used for corrosion protection are galvanizing methods. Hot-dip galvanizing (TS 914 standard EN ISO 1461, coating thickness 55-120 µm.) Technical characteristics: Tray height 60 mm; Tray width 300 mm; Tray length 3 m; Steel sheet thickness 2.0 mm; Load capacity up to 250 kg/m Corrosion protection: hot galvanized
I need to find a Turkish manufacturer, an analogue of OBO Betherman in particular: cable protection tubes. protection against chemical fumes
bu kablolar stokta var mı varsa fıyatlarını ogrenebilir miyim
RJ45 Patch cable S/FTP, Cat. 6, green, LSZH, 2m. 2ea
Commercial offer. Cable assembly RFS 7M7MS12F-0500FFP - 8 pcs Cable assembly RFS 7M7MS12-1000FFP - 3 pcs. Please send CP
