i am looking à quote for oil Pump with counter.
Hey Sirs... am Importer from Ethiopia, Addis Ababa and i Need The proforma invoice of Horizontal Multistage Surface Pumps for Water Supply Project from your Potential company Q-= 62.5 l/s At H=210m 10Pcs
I hope you will kindly send me the data sheet for the water pumps according to the details below. With appreciation. 1-Supply ,install, connect, test and operate horizontal pump of (200 m3/hr.x 60 m) capacity, 1500 r.p.m, 3 ph, V=400, IP55 ,class F, 75 kw, casing made of cast iron, consists of stainless steel shaft, the motor coil is made of copper and bronze impeller, the work includes, all plumbing works, pressure gauges 2-Supply, install, connect, test and operate submersible pump of (200 m3/hr.x 20 m) capacity, 1500 r.p.m, 3 ph, V=400, IP55, class F, 22.5kw , casing made of cast iron, which should be installed in the withdrawals section " Intake", consists of stainless steel shaft, the motor coil is made of copper and bronze impeller, the work includes , all plumbing works, pipes, fittings, pressure gauges..
Hello, I am in need of shafts and other replacement parts for a cooling water pump for thermal power plant. some of the parts are more than 1 quantity, some are more these are large parts
I need to purchase pumps. Please contact me.
Pump: 1.Type of pump-Horizontal type marine self priming centrifugal pump 2. Capacity-40m³/hr at 36m head 3.Suction lift-Not less than 7m(±2m) 4.Discharge Head-Not less than 37m (±2m) 5.Suction Port-76.2mm(±10mm) 6.Discharge Port-76.2mm(±10mm) 7.Drive-Electric motor, direct coupling 8.Suction Flange-ID :75mm (±10mm),Edge to edge : 125mm×125mm, square type At 45° angle,PCD: 90 mm 04 holes of 10mm dia .Flange thickness 10 mm 9.Discharge Flange-ID :75mm (±10mm),Edge to edge : 125mm×125mm, square type At 45° angle,PCD: 90 mm 04 holes of 10mm dia .Flange thickness 10 mm Motor: 1. power supply-440V 60Hz, 3 phase. The motor should have the tolerance of ±10% voltage fluctuation. Please provide us the price quotation of a suitable product as per above specifications along with relevant drawings, documents and catalogs. If you need any further information, please let us know.
we have a request for semi-submersible pumps.
Kindly provide us with your quotation to cover the supply of the materials specified as per the following and attachment:- Req. no. 087 /2024 Complete Sulfuric acid pump with motor. Quantity/ complete assembly one. • Validity of your offer: • Delivery Period(production date + shipping date)
1- Two Self-Priming Pumps completed with electrical motor, base plate, coupling, coupling guards, and all necessary accessories required to get the pumps ready for operation and testing after installation as specified in this specification. 2. Two suction lines for pumps of Non-Collapsible Flexible Hoses , 6” size , 12m length of each, with Reinforcement coils ,Corrugated of heavy duty PVC or rubber with smooth bore construction, suitable for Operating Temperature: -5 to +60°C and suitable for the vacuum pressure generated in the suction line that not less than 10m H2O minus lift. 3. Two foot non-return valves , stainless steel constriction, ANSI flanges class 150 end. 4. (4) Nobs of pipes adapters to Join the ANSI flanges class 150 end with the inner bore of flexible suction hose , steel construction with the necessary tightening clamps that suit the flexible suction line. You are kindly requested to indicate the following terms in your offer : Total amount EXW.
