1.- LUMINAIRE UNIT WITH LED TECHNOLOGY 150-170W ( quantity:10,000)
LUMINARY
• BRAND: INDICATE
• MODEL OF THE LED TECHNOLOGY LUMINAIRE: INDICATE
• ORIGIN: INDICATE
• NOMINAL POWER OF THE LED LUMINAIRE: IT MUST BE IN THE RANGE OF 150 - 170W
• POWER FACTOR OF THE ASSEMBLY OF THE LED LUMINAIRE: ≥ 0.95
• WEIGHT OF THE LED LUMINAIRE: ≤ 12 KG (may vary)
• THE OPTICAL AND ELECTRICAL BLOCK: THEY SHOULD BE IN SEPARATE COMPARTMENTS, SHARING THE SAME CASE.
• THE FIXING SYSTEM OF THE LED LUMINAIRE MUST HAVE ELEMENTS WITH HIGH OXIDATION RESISTANCE, SUITABLE FOR OUTDOOR INSTALLATION.
• FIXING ON METAL TUBES WITH AN EXTERNAL DIAMETER OF: LESS THAN OR EQUAL TO 48.33 MM UP TO GREATER THAN OR EQUAL TO 60.3 MM. AND WHERE APPROPRIATE, WASHERS, GALVANIZED OR ZINC PLATED.
• TILT ANGLE THAT IS ADJUSTABLE ON SITE FOR BOTH POST-TOP (0 TO +15°) AND SIDE ENTRY (0 TO -15°) ASSEMBLY IN 5° STEPS.
• IMPACT RESISTANCE INDEX: ≥ IK 08; IN ACCORDANCE WITH THE UNE-EN 62262 STANDARD OR ITS EQUIVALENTS
• TIGHTNESS OF THE OPTICAL BLOCK: ≥ IP 66; IN ACCORDANCE WITH THE IEC 60598 STANDARD OR ITS EQUIVALENT ACCORDING TO THE ORIGIN OF THE LUMINAIRE.
• THE MODEL OF THE LUMINAIRE SHOULD HAVE SEALING ON THE BODY IN LOW OR HIGH RELIEF MADE IN THE FACTORY, STICKERS OR OVERLAPPED PLATES WILL NOT BE ACCEPTED.