Notre organisation a besoin d'une proposition de prix pour le moteur submersible Kurlar Ss 304 40hp pour avancer dans l'approvisionnement, couvrant toutes les conditions applicables.
Pump: 1.Type of pump-Horizontal type marine self priming centrifugal pump 2. Capacity-40m³/hr at 36m head 3.Suction lift-Not less than 7m(±2m) 4.Discharge Head-Not less than 37m (±2m) 5.Suction Port-76.2mm(±10mm) 6.Discharge Port-76.2mm(±10mm) 7.Drive-Electric motor, direct coupling 8.Suction Flange-ID :75mm (±10mm),Edge to edge : 125mm×125mm, square type At 45° angle,PCD: 90 mm 04 holes of 10mm dia .Flange thickness 10 mm 9.Discharge Flange-ID :75mm (±10mm),Edge to edge : 125mm×125mm, square type At 45° angle,PCD: 90 mm 04 holes of 10mm dia .Flange thickness 10 mm Motor: 1. power supply-440V 60Hz, 3 phase. The motor should have the tolerance of ±10% voltage fluctuation. Please provide us the price quotation of a suitable product as per above specifications along with relevant drawings, documents and catalogs. If you need any further information, please let us know.
i require submersible motors with pumps
Kindly quote for the below items PUPMP , PUMP HEAD & MOTOR 1. AC Pump 3 phase SS612/13 Head : 116 Flow ;10@116m Motor :5.5kw 2. AC Pump 3 phase SS612/10 Head : 91.66 Flow ;10@90m Motor :5.5kw 3. AC Pump 3 phase SS612/13 Head : 73 Flow ;15@73m Motor :5.5kw 4. AC Pump 3 phase SS612/16 Head : 91.66 Flow ;15@90m Motor :7.5kw 5. AC Pump 3 phase SS615/10 Head : 95 Flow ;15.5@80m Motor :5.5kw 6. AC Pump 3 phase SS615/14 Head : 107.44 Flow ;15@110m Motor :7.5kw
Please advise me about your submersible pumps and motors
Please quote us your lowest price for the supply of pump and motor as shown in the attached files . The input and output opening of the pump is 3 inches the flow rate is 1000 l/min and the height is 7m. It's uded as an external pump to withdraw fuel from a fuel truck into an underground fuel tank.
I need a mixer with approximately the same parameters, what can you recommend from your products and how much does it cost? MSX 5,5 Output 5,5 kW Voltage 400 Hz 50 Mixing power 2 800 m3/h Pit volum 900 m3 Propeller 550 mm
We are interested in external pumps with a motor for withdrawing petrol fuel from fuel truck to an underground storage fuel tank. The required flow rate is 1000 l/min. Max. head is 7m. inlet and outlet is 3 inches in diameter.
Am looking for a submersible borehole pumps and motors manufacturers from Turkey
can you recommend a water pump manufactures in izmir in addition , a water hose and electric motor manufactures
