TP – 135 series Triplex Pumps are generally designated pump water and mud. They can be equipped in three different ways as Electrical motor, Diesel engine and Hydraulic driven motor. Triplex Pumps spare parts, ceramic cylinders, stainless valves, balls and seals can be easily changed. The three cylinders, which are made of steel reinforced ceramic material, are durable against to corrosion and can be changed easily. The valves, which aren in the form of ball, are made of stainless steel and the valve seats are manufactured from tempered steel. The pump safety valve adjusted according to 50 bar pressure. If the pressure in the system exceeds these values, then the safety valve activates and by means of this the pump housing is protected against to excessive pressure. The pump safety valve can be adjusted to lower values mentioned above, however, it should not be adjusted over 70 bar. The pressure values can be observed with a manometer 0-100 bar. Configuration: Horizontal Triplex Pump Number of Pistons: 3 Stroke Lenght:69.9m m (2.75 in) Piston Laod: 2.69 kg (5.93lb) Ratio: 3.6:1 Lube Oil Capacity: 5L (1.3 gallon) Lube Oil Type: SAE 30 Suction Size: 2″ NPT Discharge Size: 1-1/4″ NPT Valve Type: Ball Valves Pump Weight: 209 kg (460lbs) Speed Rating: 625 rpm