We are interested in conveyors
It is necessary to manufacture roller supports for the conveyor in compliance with the following requirements: SFS-EN 22768-1, SFS-EN ISO 13920
I would like to get a quote for a conveyor system wheel. I have a drawing which I can send to your email. Characteristics: Outer diameter - 240 mm Shaft setting - 35 mm Shaft setting should be rigid, wheel mounting should be grub screw (blunt bolt). Outer part of the wheel should be covered with polyurethane or rubber which leaves no trace. Nave-box material – plastic or aluminum. Quantity needed - 100 pcs.
Re: #1 Shredder Shredder for processing film in bales. Bale size - 1.2*1*1m / 500kg. Bales can be fastened the with thin wire. It should be designed to work with LDPE film with a thickness of 30 to 300 microns, including those with a high degree of contamination. As part of the delivery, it is necessary to provide: Control panel (PLC), Line-conveyor to the shredder for film bales, but not the bale is processed completely. The staff breaks the bale into layers manually and feeds it separately on the conveyor. Optionally provide: A weight batcher in the buffer, which will accumulate flex and give out further to the line when the values set on the controller are reached. Primary requirements: Productivity - not less than 2000 kg per hour, The film fraction at the exit should be approximately 40 * 40 mm (50 * 50 mm is allowed), Easy access to knives for quick replacement. It is also necessary to reflect the composition and cost of the spare parts kit in the commercial offer and indicate the approximate period, how often it needs to be changed. It is also necessary to get an answer - can this shredder process polypropylene big bags. Re: #2 Squeeze Press Pressing is necessary for drying and singeing the flex. The film fraction at the entrance will be about 40 * 40 mm, 30-40 microns thick. The humidity of the film at the entrance will be about 15-20% humidity, at the exit there should be no more than 5% humidity. Productivity - not less than 1000 kg per hour, The kit must include a control panel (PLC) It is also necessary to reflect the composition and cost of the spare parts kit in the commercial offer and indicate the approximate period, how often it needs to be changed. Additionally, needed the function of the squeezer (singing off the flex after pressing). Re: #3 Granulator (extruder) Used to convert flexes into granules. We are interested in a line with a cutting on the head. Optional: 1) To provide a version with a two-stage extruder, 2) With a built-in thermal compactor. Productivity: 500 kg per hour on PVD. But it should be able to work with LDPE, HDPE and polypropylene. The melt flow index (MFI) is from 0.3 to 1. It is necessary to provide a version with two degassing zones. The kit must include a control panel (PLC) Auger: bimetal, Diameter to length ratio: 30:1. Filter: Either "infinite" (2-channel, 2-position), Or laser cleaning filter. In the commercial offer, it is also necessary to reflect the composition and cost of the spare parts kit and indicate the approximate period, how often it needs to be changed. Looking forward for your soonest reply.
We have SANDVIK CJ615, CJ815, CH440, CH660, CS660, CV117, CV217, Pantera 1500, Pantera 1500i, SANDVIC and Siebtechnic screeners, numerous belt conveyors. Interested to build reliable long-term relationships with spare&ware suppliers for those machines.
i am looking for turkish high-quality industrial components of a wide range like sprockets , chains, engines , reducers , gearboxes , conveyor belts, belts e.t.c.
, I am interested in klgg200 clamping bushings or similar, in the amount of 4 pieces.
Do you produce drop forged forked chains?
4 pcs. bucket elevator with 3,5 cub meter/hour, st 37 painted, buckets for food contact apprx. 2 liter, easy removable from chain, one input, one output, output funnel AISI 304, head 1500mm, foot 1500 mm, size from bottom to output funnel 6000mm, 6000mm, 7000mm, 8400 mm.
Beyaz Gubre Bandi ile ilgili soracaktim 1.18×250 mt 60 adet toplam 17700 m2 lazim bize
